Lifted+DwellForms™
Choose My Kit

Put the drill down

One hole is never one hole.

Add a feature wall without drilling, filling or repainting, on clean, dry, sound interior painted walls.

Free to register. No payment, no obligation. Registrants see the Introductory Launch Price before anyone else, with 48 hours of early access when the Founding 1,000 opens.

Detail of the gap between two DwellForms™ panels on a painted wall
  • No drilling
  • No painting
  • Whole panels, no cutting
  • 100% recycled PET felt
  • Designed in NZ

The problem

Patch, sand, prime, repaint the whole wall, regret.

Anyone who has filled a hole knows the patch is the easy part. Touch-ups rarely match. Even with the same tin, the sheen shows, and suddenly you're repainting the whole wall, edge to edge.

DwellForms™ goes up with adhesive pads, not screws or nails. No holes to fill. No touch-ups that never quite match.

Source: r/paint

Why it works

Three reasons to leave the drill in the cupboard.

01

No drilling

Adhesive pads hold lightweight PET felt panels on suitable interior painted walls.

02

Tested adhesive

In our testing, almost six months on properly prepared, sound walls with no damage.

03

Honest about walls

We'll tell you which walls suit DwellForms™ and which don't.

Is my wall suitable?

Know your wall before you start.

Full guide on the Hub

Not suitableSuits DwellForms™
Textured, dusty or damp wallsPainted plasterboard or gib in good condition
Flaking or fragile paintSmooth, sound painted interior walls
WallpaperClean, dry surfaces
Wet areas, beside showers, above cooktops—
Freshly painted walls that haven't fully cured—
Close-up of textured Oxblood PET felt panels on a painted wall

Our testing

We tested the usual adhesive. It failed our walls.

Before we launched, we tested the adhesive tabs most people already use. They damaged our test walls, so we didn't use them.

We chose a gentler nano-adhesive pad instead. In supplier testing, it showed no wall damage at 24 hours, 48 hours, 72 hours, 5 days and 7 days. In our own testing, DwellForms™ has now been on properly prepared, sound interior painted walls for almost six months with no damage.

  1. 24 h
  2. 7 days
  3. ~6 months

Every wall is different, so we can't promise how every paint or surface will respond. That's why we ask everyone to test one pad first.

How to test your wall →

The kits

Three kits. Six layouts each. Your colour.

Linear Accent

Small wall. Big shift.

19 panels · approx. 1.5 m²

For hallways, entries, desks and bedside walls. Style it horizontally or vertically.

Founding priceRevealed to registrants first
Choose Linear Accent →

Linear Feature

For the wall that anchors the room.

28 panels · approx. 2.5 m²

For walls behind beds, sofas and dining tables, and longer blank walls.

Founding priceRevealed to registrants first
Choose Linear Feature →

Skyline

Sculptural drama, your way.

21 statement panels · approx. 3 m²

Bold height when styled vertically, or a wider, grounded feature when styled horizontally.

Founding priceRevealed to registrants first
Choose Skyline →

Registrants see the Introductory Launch Price first, with 48 hours of early access before the Founding 1,000 opens to everyone. Every kit includes precision-cut 9 mm panels in 100% recycled PET felt, plus adhesive pads. Quick steps are printed inside the box lid. All six layouts and full instructions are on the DwellForms Hub. Coverage is approximate and depends on your layout and spacing. Launch colours: Warm Ochre, Ember Rust, Oxblood and Petrol Teal. Layout drawings are shown in one colour for illustration.

How it works

Five steps. No tradie.

Quick steps are inside the box lid. Full instructions are in the Installation Centre.

  1. Plan your layout

    Choose one of six layouts for your kit on the Hub, or create your own using whole panels.

  2. Clean your wall

    Clean, dry, smooth and sound. Test one adhesive pad in an inconspicuous spot first.

  3. Apply adhesive

    Attach the adhesive pads to the back of each panel.

  4. Press to place

    Position each panel and press firmly.

  5. Step back and enjoy

    That's the wall sorted.

FAQ

Questions, answered

Will it work on brick or concrete?

Only on smooth, sound, painted interior surfaces. Bare brick, block and textured finishes aren't suitable. If you're unsure, test one pad first.

What happens when I take it down?

Follow the removal guide on the Hub. Results depend on the paint and wall condition, which is why we ask you to test first.

I live in an apartment. Can I use it?

DwellForms™ is a non-structural, cosmetic change, but body corporate rules vary, so check yours first.

DwellForms™ is designed for no-drill adhesive installation on clean, dry, smooth and sound interior painted walls. It's not recommended for textured, dusty, damp, flaking, wallpapered or fragile painted surfaces, or for wet areas. Adhesive performance and removal can vary with paint type, wall condition, humidity and installation, so always test one adhesive pad in an inconspicuous area first.

PET felt panels are fire-rated to EN 13501-1 Class B-s1, d0. The Introductory Launch Price applies to the first 1,000 kits or for 21 days after the Founding 1,000 opens, whichever comes first. Standard prices apply after that. All prices include GST.

Learn more about DwellForms™ →

© Lifted+ · Auckland, New Zealand · [email protected]