Lifted+DwellForms™
Choose My Kit

The wall diary

We tested the usual adhesive. It failed our walls.

So we chose something gentler, and kept testing.

Free to register. No payment, no obligation. Registrants see the Introductory Launch Price before anyone else, with 48 hours of early access when the Founding 1,000 opens.

Close-up of textured PET felt on a DwellForms™ panel
  • No drilling
  • No painting
  • Whole panels, no cutting
  • 100% recycled PET felt
  • Designed in NZ

The problem

Adhesive has let you down before.

Either it falls off, or it takes the paint with it. We heard both complaints over and over, so we set out to test before we launched.

The testing

What we did before launch.

01

We rejected the usual tabs

The adhesive tabs most people already use damaged our test walls. That ruled them out.

02

We chose nano-adhesive pads

In supplier testing, they showed no wall damage at 24 hours, 48 hours, 72 hours, 5 days and 7 days.

03

We kept going

Our own DwellForms™ wall has now been up for almost six months on properly prepared, sound interior painted walls, with no damage.

04

We'll keep reporting

Updates at 12 months, on more paint types.

The wall diary

Almost six months on the wall.

Internal Lifted+ test on a properly prepared, sound interior painted wall. Your results depend on your wall and paint.

DwellForms™ wall installed on day 1
Day 1 · Installed

Your part

Test one pad first. Every time.

Every wall is different, so we can't promise how every paint or surface will respond. Stick one adhesive pad in an inconspicuous spot first and check it before installing the full layout.

How to test your wall →

The kits

Three kits. Six layouts each. Your colour.

Linear Accent

Small wall. Big shift.

19 panels · approx. 1.5 m²

For hallways, entries, desks and bedside walls. Style it horizontally or vertically.

Founding priceRevealed to registrants first
Choose Linear Accent →

Linear Feature

For the wall that anchors the room.

28 panels · approx. 2.5 m²

For walls behind beds, sofas and dining tables, and longer blank walls.

Founding priceRevealed to registrants first
Choose Linear Feature →

Skyline

Sculptural drama, your way.

21 statement panels · approx. 3 m²

Bold height when styled vertically, or a wider, grounded feature when styled horizontally.

Founding priceRevealed to registrants first
Choose Skyline →

Registrants see the Introductory Launch Price first, with 48 hours of early access before the Founding 1,000 opens to everyone. Every kit includes precision-cut 9 mm panels in 100% recycled PET felt, plus adhesive pads. Quick steps are printed inside the box lid. All six layouts and full instructions are on the DwellForms Hub. Coverage is approximate and depends on your layout and spacing. Launch colours: Warm Ochre, Ember Rust, Oxblood and Petrol Teal. Layout drawings are shown in one colour for illustration.

How it works

Five steps. No tradie.

Quick steps are inside the box lid. Full instructions are in the Installation Centre.

  1. Plan your layout

    Choose one of six layouts for your kit on the Hub, or create your own using whole panels.

  2. Clean your wall

    Clean, dry, smooth and sound. Test one adhesive pad in an inconspicuous spot first.

  3. Apply adhesive

    Attach the adhesive pads to the back of each panel.

  4. Press to place

    Position each panel and press firmly.

  5. Step back and enjoy

    That's the wall sorted.

FAQ

Questions, answered

Which adhesive did you reject?

A widely used adhesive tab that damaged our test walls.

Will the panels fall off?

DwellForms™ PET felt panels are lightweight, and our test wall has held for almost six months. Follow the wall prep steps carefully, because clean, dry, sound walls matter.

What about freshly painted walls?

Wait until the paint has fully cured, following the paint manufacturer's guidance, then test one adhesive pad before installing.

DwellForms™ is designed for no-drill adhesive installation on clean, dry, smooth and sound interior painted walls. It's not recommended for textured, dusty, damp, flaking, wallpapered or fragile painted surfaces, or for wet areas. Adhesive performance and removal can vary with paint type, wall condition, humidity and installation, so always test one adhesive pad in an inconspicuous area first.

PET felt panels are fire-rated to EN 13501-1 Class B-s1, d0. The Introductory Launch Price applies to the first 1,000 kits or for 21 days after the Founding 1,000 opens, whichever comes first. Standard prices apply after that. All prices include GST.

Learn more about DwellForms™ →

© Lifted+ · Auckland, New Zealand · [email protected]

Sources

  • No statistics on this page

DwellForms Hub